Bosch HBL53 Installation Manual

Also see for HBL54: Installation manual Use and care manual Use and care manual Use and care manual Use and care manual

Contents

English 104. Guide the unit straight back into the cabinet cutout.Note: Be careful not to crimp the flexible conduitbetween the oven and the cabinet back wall. Ifnecessary, guide the flexible conduit into the wall orcabinet access hole so it doesn’t prevent the unit frombeing pushed all the way into the cabinet opening. Theoven should be straight and level, not crooked.5. Install the oven bottom trim while the door is removedand the unit is in place. (Do not push the unit all theway in, leave about 1 inch extending from the front ofthe cabinet). Use two of the screws provided in the redbag included with the trim piece.3. Push the unit straight in until the oven trim is flush withthe front of the cabinet trim.4. Install supplied screws through tap holes in trim. (2screws for single ovens, 4 screws for double/comboovens).To replace the oven door:1. Align holes in trim ends with holes at bottom of oven.2. Insert screws and tighten firmly. Do not overtighten.1. Hold the door firmly inboth hands.2. Hold the door at a 30ºangle from the closedposition and inserthinges into the slots.You may need to rockthe door forward andbackward slightly toseat the hinge feet.3. The door may need tobe removed and re-inserted until thehinges sit correctly inthe slots.4. Open door all the wayto expose hinges,levers, and slots.5. Push levers forwardand down until seatedon the bracket.6. Close and open doorslowly to be sure it iscorrectly and securelyin place. Door must bestraight, not crooked.