Bosch DVR16E2302 Installation Manual

Also see for Divar 2: Installation manual

Contents

Bosch Security SystemsDivar | Installation Manual | Using the Configuration Tool EN | 6-2Getting startedTo use the Configuration Tool to change settings, the unit must be physicallyconnected to a PC via the RS232 Console Port or via a network connection. TheConfiguration Tool application must be installed on the PC.System requirementsOperating platform: A PC or compatible running Windows 95, Windows 98,Windows Millennium, Windows NT 4.0 (SP4),Windows 2000 or Windows XP.For the Configuration Tool application, the minimum PC requirements are:• Processor: 200 MHz Pentium with MMX (or equivalent)• RAM memory: 32 MB (depends on operating system)• Hard disk space: 15 MB free• Video system: 800x600 with 16-bit color• Connectivity: A free RS232 port or a 10/100-BaseT network interfaceInstalling the Configuration ToolThe Configuration Tool is automatically installed on the PC when you install theControl Center application. To install separately:1. Insert the CD-ROM into the CD-ROM drive on your PC.> The installation program starts automatically.2. If installation does not start automatically, locate the Setup.exe file on the CDand double click it.3. Follow the instructions on the screen and select to install the ConfigurationTool when asked to complete the installation.Starting the Configuration ToolStarting the Configuration Tool depends on how you are connected to the unit:• via a serial RS232 connection,• via a network, or• offlineSerial connectionIf your PC is connected directly to the unit via the serial RS232 connection,double click the Configuration Tool icon on your desktop window to start theprogram. Select the Serial connection entry from the DVR list.Network connectionTo start the Configuration Tool without using the Control Center, double clickthe Configuration Tool icon on your desktop window to start the program.Alternatively, select the Divar Configuration Tool program via the Start buttonon the task bar and the Programs menu item. Follow the login procedure.To start the Configuration Tool via the Control Center, click the Config buttonin the Control Center window. You must first be logged into the Control Centeras an administrator to open the Configuration Tool in this way.Offline configurationIf you choose to log in with an offline configuration, you should select the Divarversion, model, the video standard and the cameras that are connected.