Bosch DVR 630/650 Installation And Operation Manual

Contents

Video Recorder 630/650 Series Configuration menu | en 71Bosch Security Systems Installation and Operation manual F.01U.169.663 | v2.0 | 2012.02More E-mail Settings - FromThis is the e-mail address that will appear as the sender of all e-mail originating from the unit.More E-mail Settings - SubjectThis is the subject that will appear in all e-mail sent by the unit.More E-mail Settings - ToEnter up to three e-mail addresses that outgoing e-mail should be sent to.6.6 System6.6.1 Date/TimeFigure 6.20 System -Date/Time1. Enter the actual Date.2. Fill in the actual Time.3. Select a Date format which shows either the month (MM), the day (DD), or the year(YYYY) first.4. Select either a 12-hour or a 24-hour clock Time format.5. Select a Time zone from the list (daylight saving time must be set manually).6. Set Daylight Saving to On to enable it. Fill in the day, month, and time of both Start andEnd time, and the Offset if it differs from the information associated with your time zone.6.6.2 NTPThe Time server function synchronizes the time of the unit with the time of a network timeserver or another NTP-capable device. Choose either a Public Server to use a calibrated NTPserver on the Internet, or select a Private Server to set your own time source. Fill in the IPaddress of the private network time server. Ensure that firewalls do not block NTP traffic viaUDP port 123.1. Press NTP Test to start time synchronization.2. Set the Synchronization Interval to keep the unit closly matched with the time source.– Intervals can be as frequent as hourly, or as long as monthly.