Bosch AMAX panel 2000 ICP-AMAX-P User Manual

Also see for AMAX panel 2000 EN ICP-AMAX-P-EN: User guide Installation manual

Contents

AMAX panel 2000 / AMAX panel 2000 EN Introduction | en 5Bosch Sicherheitssysteme GmbH User Guide F.01U.249.500 | V4 | 2011.12Keypad IndicatorsTable 1.2 Keypad IndicatorsLCD keypadindicator iconsLED keypadindicator lightsStatus DefinitionZone (1-8) on Zone is triggered.off Zone is normal.Fast flash (0.25 seconds lights on/0.25 seconds lights off)Zone was alarmed or is in alarmstatus.Slow flash (1 second lights on/1second lights off)Zone is manually bypassed orinterior Zone is in STAY ARM mode.AWAY on System is armed in AWAY mode.off System not armed in AWAY mode.Slow flash (1 second lights on/1second lights off)Exit time.Fast flash (0.25 seconds lights on/0.25 seconds lights off)Programming mode or Codefunction mode. STAY indicatorflashes simultaneously.STAY on System is armed in STAY mode.off System not armed in STAY mode.Slow flash (1 second lights on/1second lights off)Exit time.Fast flash (0.25 seconds lights on/0.25 seconds lights off)Programming mode or Codefunction mode. AWAY indicatorflashes simultaneously.When bypass function isperformed, the STAY indicator onlyflashes.MAINS on AC main power is normal.Slow flash (1 second lights on/1second lights off)AC main power supply failed.FAULTS on System fault or Tamper conditionis present.off System is in normal status.Flashes System fault or Tamper conditionmust be acknowledged.on System is disarmed.1 2 3 ….