Black & Decker BDI200 Instruction Manual

Contents

THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR THE 200WATT POWER INVERTER MODEL BDI200.WARNING: TO REDUCE THE RISK OF INJURY:• Follow these instructions and those published by battery manfacturer and the manufacturer ofany equipment you intend to use with this unit. Review cautionary markings on these productsand on engine.INTRODUCTIONThank you for purchasing the BDI200 200 watt Power Inverter with USB Charging Port. Thisinverter can be used to operate personal electronics such as: laptop computers, digital/videocameras, MP3 players, cell phones, PDAs, and more. It can also be used to recharge AC devicesthat have an appropriate recharging adapter with a standard plug. Please read this InstructionManual carefully before use to ensure optimum performance and to avoid damage to this product.FEATURESThe front panel provides three LED indicators. The green LED indicates power and properoperation of the inverter. The AC and USB outlets are ready to use. The red LED indicates invertershutdown from an over-load, Yellow LED lit fault indicates an input fault or over temperature. (Ifthe red or yellow Fault LED Indicator lights, refer to the Troubleshooting Section of thisInstruction Manual.)The Power Pushbutton turns the inverter ON and OFF. It can also be used to force reset of invertercircuits by pressing it OFF (no LEDs are lit), then back ON again. AC power is supplied through alocal standard outlet.Controls and FunctionsSAVE THESE INSTRUCTIONSAC OUTLETAIR VENTPOSITIVE DCPOWERCONNECTIONNEGATIVE DCPOWERCONNECTIONHIGH SPEED COOLING FANON/OFFPUSHBUTTONOUTPUTFAULT INPUTFAULTPOWER22