Black & Decker 90529709 Instruction Manual

Contents

important safety instructions

GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCESREAD ALL INSTRUCTIONSWARNING: TO REDUCE THE RISK OF INJURY, USER MUST READ INSTRUCTION MANUAL.DANGER: LASER RADIATION:• Avoid direct eye exposure; serious eye injury can result.• Do not use optical tools such as a telescope or transit to view the laser beam.• Do not place the laser in a position which may cause anyone to intentionally or unintentionally stare intothe laser beam. Serious eye injury could result• Do not operate the laser around children or allow children to operate the laser.WARNING: DO NOT DISASSEMBLE THE LASER: There are no user serviceable parts inside.Disassembling the Laser will void all warranties on the product. Do not modify the product in any way.Modifying the tool may result in Hazardous Laser Radiation Exposure.• Repairs and servicing MUST be performed by a qualified repair facility. Repairs performed by unqualifiedpersonnel could result in serious injury.SAFETY GUIDELINES /DEFINITIONSDANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death orserious injury.WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death orserious injury.CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor ormoderate injury.CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if notavoided, may result in property damage.RISK OF UNSAFE OPERATION: When using tools or equipment, basic safety precautions should always befollowed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools orequipment could result in serious injury and property damage. There are certain applications for whichtools and equipment are designed. Black & Decker strongly recommends that this product NOT bemodified and/or used for any application other than for which it was designed. Read and understand allwarnings and operating instructions before using any tool or equipment.IMPORTANT SAFETY INSTRUCTIONSWARNING: This product contains lead, a chemical known to the State of California to cause cancer andbirth defect or other reproductive harm. Wash hands after handling.• Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.• Use only with the specifically designated batteries. Use of any other batteries may create a risk of fire.• Store idle product out of reach of children and other untrained persons. Lasers are dangerous in thehands of untrained users.• Do not remove or deface warning labels. Removing labels increases the risk of exposure to radiation.• Turn the laser off when it is not in use. Leaving the laser on increases the risk of staring into the laserbeam.• This product is intended for use in a temperature range of 50°F (10°C) – 104°F (40°C).• Read And Understand This Instruction Manual Before Using This Unit.WARNING: Batteries can explode, or leak, and can cause injury or fire. To reduce this risk:• Carefully follow all instructions and warnings on the battery label and package.• Always insert batteries correctly with regard to polarity (+ and -), marked on the battery and theequipment.• Do not short battery terminals.• Do not charge batteries.• Do not mix old and new batteries. Replace all of them at the same time with new batteries of the samebrand and type.• Remove dead batteries immediately and dispose of per local codes.• Do not dispose of batteries in fire.• Keep batteries out of reach of children.• Remove batteries if the device will not be used for several months.“Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact withconductive materials such as keys, coins, hand tools and the like. The US Department of TransportationHazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes(i.e. packed in suitcases and carryon luggage) UNLESS they are properly protected from short circuits. Sowhen transporting individual batteries, make sure that the battery terminals are protected and well insulatedfrom materials that could contact them and cause a short circuit.”SAVE THESE INSTRUCTIONSFOR YOUR CONVENIENCE AND SAFETY, A WARNING LABEL IS LOCATED ON YOUR LASER AS SHOWNIN THE FOLLOWING PICTURE.INTRODUCTIONThank you for choosing the Black & Decker® Bullet Beam Laser Pointer. Please read this manual carefullybefore use to ensure optimum performance and avoid damage to the unit.FEATURESTROUBLESHOOTINGCARE AND MAINTENANCEThis unit is NOT waterproof. Never submerge this unit in water. If it gets dirty, gently clean the outers u rfaces with a soft cloth moistened with a mild solution of water and detergent.Safe Battery DisposalRefer to the Safety Warnings in the front of this Instruction Manual when selecting and replacing batteries.Always dispose of used batteries properly.WARNINGS: TO REDUCE THE RISK OF INJURY / EXPLOSION• Do not dispose of batteries in fire as this may result in an explosion.• Do not expose the unit containing batteries to fire or intense heat as it may explode.ACCESSORIESRecommended accessories for use with your tool are available from your local dealer or authorized serv i c ecenter. If you need assistance regarding accessories, please call: 1-800-544-6986.WARNING: The use of any accessory not recommended for use with this tool could be hazardous.SERVICE INFORMATIONAll Black & Decker Service Centers are staffed with trained personnel to provide customers with efficientand reliable power tool service. Whether you need technical advice, repair,or genuine factory replacement parts, contact the Black & Decker location nearest you.To find your local service location, refer tothe yellow page directory under "Tools—Electric" or call: 1-800-544-6986 or visitwww.blackanddecker. c o m.FULL TWO-YEAR HOME USE WARRANTYBlack & Decker (U.S.) Inc. warrants this product for two years against any defects in material orworkmanship. The defective product will be replaced or repaired at no charge in either of two ways.The first, which will result in exchanges only, is to return the product to the retailer from whom it wasp u rchased (provided that the store is a participating retailer). Returns should be made within the timeperiod of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may berequired. Please check with the retailer for their specific return policy regarding returns that are beyond thetime set for exchanges.The second option is to take or send the product (prepaid) to a Black & Decker owned or authorizedS e rvice Center for repair or replacement at our option. Proof of purchase may be required. Black & Deckerowned and authorized Service Centers are listed under "Tools-Electric" in the yellow pages of the phoned i r e c t o ry and on our website www.blackanddecker.com.This warranty does not apply to accessories. This warranty gives you specific legal rights and you mayhave other rights which vary from state to state or province to province. Should you have any questions,contact the manager of your nearest Black & Decker Service Center. This product is not intended forcommercial use.FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement.SPECIFICATIONSWave length: 650nmMaximum output: <5mWLaser: Class IIIABatteries: 3 (three) button cell, LR44 1.5 voltImported byBlack & Decker (U.S.) Inc.,701 E. Joppa Rd.Towson, MD 21286 U.S.A.RD011108Problem SolutionLaser light becomes dim or is nolonger visible when the ON/OFF switchis switched ON.Check or change the batteries. Follow all cautions andwarnings in the Important Safety Instructions section ofthis manual when changing batteries.• Wave length 650nm• Class IIIA Laser• Heavy duty, rugged casing perfect for outdooruse• Detachable keychain clasp• Includes 3 (three) LR44 1.5 volt batteriesThank you for choosing Black & Decker!Go towww.BlackandDecker.com/NewOwnerto register your new productBEFORE RETURNING THISPRODUCT FOR ANY REASONPLEASE CALL1-800-544-6986BEFORE YOU CALL, HAVE THE CATALOGNo, AND DATE CODE AVAILABLE. INMOST CASES, A BLACK & DECKERREPRESENTATIVE CAN RESOLVE THEPROBLEM OVER THE PHONE. IF YOUHAVE A SUGGESTION OR COMMENT,GIVE US A CALL. YOUR FEEDBACK ISVITAL TO BLACK & DECKER.SAVE THIS MANUAL FOR FUTURE REFERENCE.Cat. # LP001B Form # 90529709November 2007 Copyright © 2007 Black & Decker Printed in ChinaBULLET BEAM LASER POINTERINSTRUCTION MANUALCatalog Number LP001BLP001B ManualENSP 011108.qxp 9/26/08 12:52 PM Page 2

/ 2

Related manuals for Black & Decker 90529709