Bartington Grad-13 Series Operation Manual

Also see for Grad-13 Series: Operation manual

Contents

Bartington Grad-13 Series Operation Manual Manual pdf 27 page image

BARTINGTON INSTRUMENTSDCN1040 Page 27 of 39 OM3100/28.3. MultiGrad13 SoftwareWhen using an array of Grad-13 sensors for survey purposes the MultiGrad13 software can beused to log the data output.8.3.1. MultiGrad13 InterfaceThe main window is shown in Figure 22. A list of current surveys will be shown in the centre, if nosurveys have been taken this will be blank.Figure 22: MultiGrad13 Main WindowNew Survey: This button creates a new survey and opens the New Survey Window, see figure 23.Edit Survey: Used to edit or view an existing survey. Select the survey from the centre windowand then use this button to open it.Options: Allows the user to set the walking speed for the survey, see figure 32. This can also bedone for each grid using the settings button in the Grid Window.Delete Survey: Will delete the currently selected survey.Close: Closes the software.Choosing to create a new survey will open up the Window shown in figure 23. In this windowthe survey name should be entered in the ‘Name’ box, and further notes can be entered in the‘Notes’ box if desired.