Bartington Grad-13 Series Operation Manual

Also see for Grad-13 Series: Operation manual

Contents

Bartington Grad-13 Series Operation Manual Manual pdf 14 page image

BARTINGTON INSTRUMENTSDCN1040 Page 14 of 39 OM3100/26.3.3 External PowerThe unit can be powered by an external battery to be connected to the unit if the internalbatteries become exhausted. This is currently under development.6.4.FusesFor safety reasons, the battery (comprising four separate assemblies) has four internal fuses.These are not customer replaceable and in the event of the fuses blowing, the device must bereturned to Bartington Instruments for repair.7. Installation of the Grad-137.1. UnpackingSafe handling precautions must be observed.7.2. OrientationThe directions of the sensor axes are marked on the label at the connector end.7.3. MountingThe sensor assembly is mounted in a stress free manner within the outer protective tube.Note: Ensure that the Grad-13 enclosure is not excessively stressed, as the alignment ofthe sensors may be affected or the assembly integrity may be compromised allowing theingress of foreign matter.Note: See drawings DR3344 and DR3286 on the product webpage.