R5906112-06 UDX series58Image 6-4: Input selection menu3. Select the desired stitched input.Tip: If the V&AR board is installed, scroll all the way down the Input Selection menu for the stitchedoptions on that board.Image 6-5: Input Selection menu, stitched options6.3 Connector SettingsAbout Connector SettingsThe Connector Settings menu allows you to change settings for each input connector of the projector.By default all options for every connector are set to automatic, together with the native Extended DisplayIdentification Data (EDID).When entering the menu for each input connector, you can change the following:• Color Space• Signal Range• EDIDHow to configure a connector1. Press Menu to activate the menus and select Source.Image 6-6: Select SourceGUI – Source
