9. GUI – System SettingsImage 9-22System Settings menu — Lens CalibrationThe Lens Calibration menu is displayed.Image 9-23Lens Calibration menu4. In the Lens Calibration menu, select the desired calibration action and click OK.You can select one of the following functions:- Horizontal shift- Vertical shiftThe text Calibration in progress will be displayed next to selected function until the calibration is completed.When an error is detected, the message Calibration Error is displayed next to function.9.5.4 Lens featuresWhat can be done?Some lens features can be disabled once they are correctly aligned so that a misalignment during a show is not possible.How to enable/disable1. In the main menu, System Settings → Service.Image 9-242. Enter the service code.3. In the Service menu, select Lens features.Image 9-25Service menu, lens featuresR5906112 UDX SERIES 24/05/2017 61
