Barco UDX 4K32 User Manual

Also see for UDX 4K22: Installation manual User manual User manual Installation manual User manual

Contents

Barco UDX 4K32 User Manual Manual pdf 30 page image

4. Getting StartedRemote Control Unit buttons1 Button pressed indicator. 14 Backspace (while enteringvalues)2 Shutter Open. 15 XLR connector.3 Shutter Close. 16 Decimal mark (while enteringvalues)4 Touch Panel On/Off. 17 Macro button.5 OSD On/Off. 18 Menu Back.6 Lens Zoom. 19 Default button.7 Lens Shift. 20 Lens Focus.8 Menu Activation. 21 Color On/Off.9 Menu Selection, OK button. 22 Test Patterns.10 Menu Navigation. 23 Power On.11 Input Selection. 24 Power Off.12 Address button. 25 Stereo Jack.123456789101112152423222120191817161314262513 Numeric buttons. 26 RCU On/Off.The projector remote control is a full feature wireless remote control, powered by two (2) standard AA batteries. The battery com-partment is on the back side of the remote control.The remote control is backlit for use in dark environments. It also has an XLR connector for wired connection to the projector. Whenthe wire is connected, the IR beam is switched off.LCD panelThe LCD panel has two main functions:1. Showing the menus and adjustment information. and also a mirror of the OSD, (On Screen Display) described in User Interfacewhen this is enabled.2. Information regarding the status of the projector showing this data:- Projector status- Network address- Active source- Current firmware version- Operation Data- Active functions (Enabled Functions).Toggle between the two indications by using the Menu button on the keypad, or on the remote controlThe LCD Display will fade out 30 seconds after the last key operation.4.2 Power on projectorHow to power on1. Press the mains switch at the side of the projector to switch on this projector.26 R5906112 UDX SERIES 24/05/2017