R5911443 /02 UDM 73Image 7-30: Example of the HDR Icon in the status menu.How to properly display HDR content?If your provided HDR content has been mastered with PQ (e.g. HDR10 and Dolby Vision), a few changes canbe made in order to project the intended mastering on screen. These changes are necessary because HDRcontent has been mastered specifically for HDR capable displays that are watched in living rooms. Theseconditions are different from a non-HDR projector and darker cinema-like environments.The projected HDR content depends on the following factors:• Mastering luminance: This is content-specific and cannot be changed.• Screen luminance: Every projection screen has a specific luminance (measured in nits or foot-lambert).Entering this luminance in the projector will adapt the content towards the intended HDR result.• HDR Boost: A variable “booster” that may amplify or downplay the HDR output.How to set the PQ?1. Make sure the chosen Gamma Type is set to AUTO. For more info, refer to “Setting the desired Gamma type”,page 65.2. In the main menu, select Image → Advanced → PQ.Image 7-31The PQ menu is displayed.Image 7-323. Select the desired Unit (nits or foot-lambert).4. Enter the Screen luminance (either in nits or foot-lambert).GUI – Image
