ENABLING BRIGHT OUTCOMESService ManualDP2K SLP Series

Barco DP2K SLP Series Service Manual

Safety

General considerations

Important safety instructions

Product safety labels

High Brightness precautions: Hazard Distance (HD)

HD for fully enclosed projection systems

HD in function of modifying optics

Getting started

Installation requirements

Unpacking the projector

Initial inspection

Communicator PC version

Commander & Web Commander

Installation process

Installation process overview

Software upgrade

Starting up and adjusting the system

Physical installation

Positioning the DP2K SLP-series projector at port window

projector tilting

Connecting the projector with the power net

Lenses & Lens selection

Available lenses

Lens selection

Lens installation

Lens removal

Lens shift, zoom & focus

Input & Communication

Introduction

Local Keypad

Projector Status

Integrated Cinema Processor (ICP)

HD-SDI Input Module (optional)

Integrated Media Block/Server (optional)

Cinema Controller

ICMP

ICMP introduction

ICMP HDD

ICMP communication ports

ICMP source input ports

ICMP DisplayPort speciﬁcations

ICMP SDI speciﬁcations

ICMP HDMI 2.0 speciﬁcations

ICMP HDMI 1.4 speciﬁcations

ICMP status LEDs

ICMP HDD status LEDs

ICMP device certiﬁcate

ICMP conﬁguration via Communicator

ICMP reset

Obtaining the Barco ICMP certiﬁcate

Removing a HDD from the ICMP

Installing a HDD into the ICMP

Communicator Touch Panel

Installing the Touch Panel interface

Repositioning the Touch Panel interface

Starting up

Switching the DP2K SLP-series ON

Switching the DP2K SLP-series OFF

Scheimpﬂug

Scheimpﬂug introduction

Scheimpﬂug adjustment

Fixation of the Lens Holder front plate

Back Focal Length adjustment

Convergence

Convergence controls

Preparing for convergence adjustment

Converging the blue pattern onto the red pattern

Converging the green pattern onto the red pattern

Closing off the Light Processor compartment

Color calibration

Calibration process

Color gamut calibration

Preventative maintenance actions

month maintenance actions

Maintenance procedures

Check the large dust ﬁlter

Check the small dust ﬁlter

Vacuum cleaning of the dust ﬁlters

Washing and drying the dust ﬁlters

Cleaning the lens

Cleaning the exterior of the projector

Authorization to clear security warning on the projector

Removal and installation of the projector covers

Removal of the Light Source cover

Removal of the rear cover

Removal of the top cover

Removal of the left side cover

Removal of the top cover plate of the Light Processor compartment

Removal of the side cover plate of the Light Processor compartment

Installation of the side cover plate of the Light Processor compartment

Installation of the top cover plate of the Light Processor compartment

Installation of the left side cover

Installation of the top cover

Installation of the rear cover

Installation of the Light Source cover

A.1 Speciﬁcations of the DP2K-8SLP series

DP2K SLP Series

DP2K-10SLP

DP2K-8SLP

Barco DP2K SLP Series Service Manual

Product

Learn More

Legal