Barco Coronis Fusion 4MP Series User Manual

Also see for Coronis Fusion 4MP: Brochure & specs Brochure & specs User guide User guide Getting started guide

Barco Coronis Fusion 4MP Series User Manual Manual pdf 11 page image

R5911227 /02 Coronis Fusion 4MP / 6MP 11Image 2-3WARNING: The display must be in its lowest position before the height-positioning system can belocked or unlocked.2.2 Cable connectionsTo connect the cables1. Open the connector compartment. Do this by gently lifting the bottom of the connector compartment cover,after which it can be removed from the display.Image 2-42. Connect one or more video sources from your workstation(s) to the corresponding video inputs on thedisplay.Note: The MDCC-4430, MDCC-6530 can have multiple video inputs connected at once, and switchingbetween these inputs can be easily done in the OSD menu. See “Image source selection”, page 31 formore info on how to configure the different video inputs on your display.Installation