Baby Trend FLEX-LOC Owner's Manual

Also see for EZ FLEX-LOC: Owner's manual Owner's manual Owner's manual

Contents

Baby Trend FLEX-LOC Owner's Manual Manual pdf 14 page image

Crotch StrapThe crotch strap is adjustable in length to ensure a safe andcomfortable fit for harness.Seat Angle IndicatorThe Seat Angle Indicatoris used to ensure that theseat is installed at theproper degree of recline toadequately protect your childin a crash.Locking ClipThe Locking Clip is stored under the padon the right side of the Infant Seat andis used to securely install the Infant Seatwith certain types of vehicle lap/shouldercombination belts.Seat Angle AdjusterThe Seat Angle Adjuster raises andlowers the rear of the Base in order toobtain the proper angle of recline forproper installation of the Infant Seatwhen using the Base.27265.0 FEATURES 5.0 FEATURESSeat Angle IndicatorLocking ClipSeat Angle Adjuster5.7 Operation of the Carry Handle• The Carry Handle has three positions:the upright carry position, a mid-storageposition, and the non-rocking position.• Depress the two buttons located on thehandle just above the connection to theInfant Seat shell to release the handle.• Slowly rotate the handle to the desiredposition. The buttons should pop outand the handle should automaticallylock into the new position.• Before lifting the Infant Seat, push onthe handle to check that both sides ofthe handle have locked into place.• Use the Mid Storage or non-rocking positionwhen the Infant Seat in the vehicle. Mid Storage invehicle positionNon Rocking invehicle positionRotate the HandleUpright CarryINCORRECTCORRECT9 kg (20 lbs / livres)�and under / et moins9-10 kg (20 - 22 lbs / livres)