Asus WiCast EW2000 User Manual

Also see for WiCast EW2000: User manual

Contents

1When I attach the receiver to the rear of my TV or external display, Icannot get a clear image on my TV or external display.The metallic rear panel of some TV or external display models may cause awireless signal decay or interference. This will result to an unclear displayimage on your TV or external display.We recommend that you provide a clear path between the receiver andtransmitter.The receiver with the velcro sticker would not stick to the externaldisplay.Clean the surfaces of the devices with a clean cloth before using the Velcrosticker to attach the receiver to the external display. This will ensure that thereceiver will firmly attach to the external display.The receiver cannot stand firmly in place.Your receiver has a sticker at the bottom to make it stand firmly in place.If the receiver cannot stand firmly in place, gently wipe the receiver’s bottomwith a clean and mildly soapy damp cloth.NoticesREACHComplying with the REACH (Registration, Evaluation, Authorisation, andRestriction of Chemicals) regulatory framework, we published the chemicalsubstances in our products at ASUS REACH website athttp://green.asus.com/english/REACH.htm.Federal Communications Commission Interference StatementEW2000RX FCC ID: MSQ-EW2000RXEW2000TX Contain Module FCC ID: MSQ-EW2000TXThis device complies with FCC Rules Part 15. Operation is subject to thefollowing two conditions:• This device may not cause harmful interference.• This device must accept any interference received, including interferencethat may cause undesired operation.E6158_EW2000_UM.indd 18 10/12/10 4:44:26 PM