Asus VENTO 3600 Quick Start Manual

Also see for 3600 - VENTO Mid Tower: User guide

E2844VENTO 3600Installing the power supply unit (PSU)B1 232 245Removing the side coverAInstalling an optical disk drive (ODD)C3154EnglishA 1. Push down to release the top tabs of the cablemanagement kit, then pull up the cable management kitto release it from the bottom tabs.2. Remove three screws on the rear panel.3. Turn the swivel 45º clockwise to release the side cover.4. Push the side cover to the direction of the rear panel.5. Tilt the side cover and slide it out of the chassis.B 1. Slide the PSU into the slot until it snugly fits the metalrail.2. Secure with screws.3. Set the voltage selector according to the voltage inyour area.C 1. Push the marked portion of the Magic Mask® to open.2. Remove the drive bay cover.3. Slide the bay lock toward the sign.4. Insert the ODD into the bay.5. Align the ODD holes with the bay holes, then slidethe bay lock toward the sign to secure the drive inplace.6. Connect cables.Continued at the backGerman FrenchTraditional Chinese Simplified Chinese122Spanish

/ 2

Related manuals for Asus 3600 - VENTO Mid Tower