Asus RP-AX56 Quick Start Manual

Placing your RP-AX56Plug your RP-AX56 into a power outlet nearyour router/AP.Check the LEDs and see the LED explanations.METHOD 1 Download the ASUSExtender App METHOD 2 Connect via WPSPress the WPS button on your router/AP.Press the WPS button on yourRP-AX56 for more than two (2)seconds until the LED starts toblink blue.RP-AX56Dual-Band Wireless RepeaterQuickStart GuideHardware ExplanationsButton ExplanationsRESET BUTTONReset the system to its factory default settings.WPS BUTTONLaunch the WPS Wizard.LAN PORTConnect your PC to the LAN port with a network cable.BEFORE SETUPSETUP METHODSWE SUGGEST…Set up RP-AX56 as a repeater1 Plug RP-AX56 into a power outlet.2 The LED will start breathing white for 3 seconds while bootingup.LAN portLEDWPS buttonreset buttonLED ExplanationsRepeater ModeStatus LED BehaviorBooting up Blinking WhiteBooting up complete (haven’tconnected to Router) Solid BlueReset (use a pin to press thereset button for 5 seconds) Blinking YellowRescue mode Solid PurpleStarting WPS Blinking BlueConnected to the router withGood Signal Solid WhiteConneccted to the router withWeak Signal Solid YellowNo Signal Solid RedAP mode (with wiredconnection) Solid WhiteAP mode (without wiredconnection) Solid RedAiMesh ModeStatus LED BehaviorBooting up Blinking WhiteBooting up complete (notconnected to AiMesh Router) Solid BlueReset (use a pin to press thereset button for 5 seconds) Blinking YellowRescue mode Solid PurpleConnecting to the AiMesh Router Blinking BlueConnected to the AiMesh Routerwith Good Signal Solid WhiteConnected to the AiMesh Routerwith Weak Signal Solid YellowNo Signal Solid RedEthernet backhaul Solid WhiteWait for the LED to flash and turn solid blue,indicating that your RP-AX56 is ready to connectto your existing router/AP.around2 meters3If you would like to connect RP-AX56 to other WiFi networks excluding AiMesh-supported routers, please download theASUS Extender App.1 2011 2

/ 2

Related manuals for Asus 90IG05P0-MO0410