Asus RP-AC66 Quick Start Manual

Also see for RP-AC66: Quick start guide Quick start guide

Quick Start GuideRP-AC66Dual-band Wireless-AC1750 RepeaterE10754First EditionAugust 20151. Power LEDOn: RP-AC66 is on2. 5 GHz Wi-Fi LEDGreen: RP-AC66 provides excellent Wi-Firepeater performance.Orange: RP-AC66 provides acceptable Wi-Firepeater performance.Red: RP-AC66 provides poor Wi-Fi repeaterperformance.: RP-AC66 is not connected to a router/AP.3. 2.4 GHz LEDGreen: RP-AC66 provides excellent repeaterperformance.Orange: RP-AC66 provides acceptable Wi-Firepeater performance.Red: RP-AC66 provides poor Wi-Fi repeaterperformance.: RP-AC66 is not connected to a router/AP.Quick Setup with WPS (Wi-Fi Protected Setup)For router/Access Point(AP) with WPS supportPower OnPlace your RP-AC66 near your router/AP and plug itto a power outlet.Wait until the power LEDturns solid green.Connect via WPS (Wi-Fi Protected Setup)1. Press the WPS button on yourRouter/AP.2. Press the WPS button on your RP-AC66 formore than two (2) seconds until the LEDsstart to blink.NOTE: Ensure that your router/AP supports WPS. Otherwise, use Method TWO.about two (2) minutes andthen turns solid green. Thecolor of the LED indicatesthe Wi-Fi signal strength.3 Place in an ideal locationAfter placing your RP-AC66 in an ideal location, RP-AC66 connects to your router/AP in about one (1) minute.NOTES:• Place your RP-AC66 between your router/APand wireless device to get the best repeaterperformance.• Place your RP-AC66 in a location where you canget green or orange Wi-Fi LED.IMPORTANT!• To minimize interference, keep RP-AC66 away from devices like cordless phones, Bluetooth devices and microwave ovens.• We recommend that you place your RP-AC66 in open or spacious location.Enjoy!1 2Frequently Asked Questions (FAQ)Q1: What should I do if my router does not support WPS?A1: You can use Method Two to set up RP-AC66.Q3: Why is it that I cannot see the login page after enteringhttp://repeater.asus.com in the browser?A3: Ensure that your computer is connected to the repeater network only,and set your computer to Obtain an IP address automatically.Q2: Why is that the Wi-Fi LED does not light up after completing MethodTwo?A2: You may have entered the wrong router SSID and password. Reset your RP-AC66,double check your router SSID/password, and set up RP-AC66 again.Q4: How do I reset RP-AC66?A4: Press the RESET button on the front cover of RP-AC66 for about two (2)Method OneYour RP-AC66’s wireless network name (SSID) chang-es to your existing Wi-Fi network name, ending with_RPT or _RPT5G and shares your router/AP’s WirelessPassword.E10754_RP-AC66_QSG_Special.indd 1 2015/8/28 14:24:19

/ 2

Related manuals for Asus RP-AC66