Asus Pedestal/5U Rackmount Server TS500-E5 User Manual

Also see for TS500-E5: Approved Vendor List Configuration guide

Contents

ASUS TS500-E5 5-21v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.BIOS SETUP UTILITYAdvancedConfigure Win627EHF Super IO ChipsetSerial Port1 Address [3F8/IRQ4]Serial Port2 Address [2F8/IRQ3]Serial Port2 Mode [Normal]OnBoard LAN1 Boot ROM [Enabled]OnBoard LAN2 Boot ROM [Enabled]←→ Select Screen↑↓ Select Item+- Change OptionF1 General HelpF10 Save and ExitESC Exit5.4.4 Onboard Device ConfigurationSerial Port1 Address [3F8/IRQ4]Allows you to select the Serial Port1 base address.Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]Serial Port2 Address [2F8/IRQ3]Allows you to select the Serial Port2 base address.Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]Serial Port2 Mode [Normal]Allows you to select the mode for Serial Port2.Configuration options: [Normal] [IrDA] [ASK IR]IR I/O Pin Select [SINB/SOUTB]This item appears only when you set the Serial Port2 Mode item to [IrDa] or[ASK IR] and allows you to select the receiver or transmit pin for Serial Port2.Configuration options: [SINB/SOUTB] [IRRX/IRTX]IR Duplex Mode [Half Duplex]This item appears only when you set the Serial Port2 Mode item to [IrDa] or[ASK IR] and allows you to select Full or Half Duplex for Serial Port2.Configuration options: [Full Duplex] [Half Duplex]Onboard LAN1/2 Boot ROM [Enabled]Allows you to do the LAN Boot ROM configuration.Configuration options: [Disabled] [Enabled]Allows BIOS to Enableor Disable FloppyController.