ASUS TS500-E5 5-115.3.4 SATA1–6; PATA Master/SlaveThe BIOS automatically detects the connected IDE devices. There is a separatesub-menu for each IDE device. Select a device item, then press to displaythe IDE device information.The BIOS automatically detects the values opposite the dimmed items (Device,Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, andS.M.A.R.T. monitoring). These values are not user-configurable. These items showN/A if no IDE device is installed in the system.Type [Auto]Selects the type of IDE drive. Setting to [Auto] allows automatic selection of theappropriate IDE device type. Select [CDROM] if you are specifically configuring aCD-ROM drive. Select [ARMD] (ATAPI Removable Media Device) if your device iseither a ZIP, LS-120, or MO drive.Configuration options: [Not Installed] [Auto] [CD/DVD] [ARMD]LBA/Large Mode [Auto]Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if thedevice supports this mode, and if the device was not previously formatted with LBAmode disabled. Configuration options: [Disabled] [Auto]Block (Multi-Sector Transfer) M [Auto]Enables or disables data multi-sectors transfers. When set to [Auto], the datatransfer from and to the device occurs multiple sectors at a time if the devicesupports multi-sector transfer feature. When set to [Disabled], the data transferfrom and to the device occurs one sector at a time.Configuration options: [Disabled] [Auto]v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.BIOS SETUP UTILITYMainPrimary IDE MasterDevice :Hard DiskVendor :xxxxxxxxxSize :xx.xGBLBA Mode :SupportedBlock Mode:16SectorsPIO Mode :4Async DMA :MultiWord DMA-2Ultra DMA :Ultra DMA-6S.M.A.R.T.:SupportedType [Auto]LBA/Large Mode [Auto]Block(Multi-Sector Transfer)M [Auto]PIO Mode [Auto]DMA Mode [Auto]SMART Monitoring [Auto]32Bit Data Transfer [Enabled]←→ Select Screen↑↓ Select Item+- Change OptionF1 General HelpF10 Save and ExitESC ExitSelect the typeof device connectedto the system.The PATA device is for ODD (optical disk drive) only.