Menu
Asus PK-519 Installation Manual
        |
E-6(22) Slide the finisher out by pulling its lever.(23) Attach the supplied rail cover to the finisher.a) Set the rail cover at the end of the rail.Note:Make the finisher’s harness come out from the railcover at the position shown in the illustration.b) Horizontally slide the rail cover.Note:• Make sure the cover’s protruding part doesn’tlay over the tube.• Secure the tabs, on the finisher’s side, belowthe rail cover.c) Secure the rail cover with the screw (front side)and the shoulder screw (rear side).Note:Use the shoulder screw and the screw suppliedwith the finisher.(24) Slide the finisher into the main unit.(25) Affixing the label.Note:Perform the following steps only when necessary.a) Slide the finisher by pulling its lever.b) By turning the lever of the punch unit, rotate thepunch unit. Affix the label supplied with the Fin-isher FS-533 to the main unit at the positionshown in the illustration.c) Return the punch unit, slide the finisher into themain unit.TubeProtruding part< OK > < NG > |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved