E-2• If the punch unit is open, do not carry the front.2. Installation proceduresNote:When mounting the punch kit, mount it beforemounting the finisher to the main unit.(1) Turn OFF the power switch and unplug thepower cord from the power outlet.(2) Remove protective tape and protective materialsand take out accessory parts.(3) If the Finisher FS-533 is mounted on the mainunit, remove the finisher.Note:<C554e/C454e/C364e/C284e/C224e/C554/C454/C364/C284/C224/C368/C308/554e/454e/364e/284e/224e>See the installation manual for the Finisher FS-533 for removal instructions.<367/287/227>See the installation manual for the Mount Kit/Fin-isher MK-602/FS-533 for removal instructions.(4) Attach the three supplied seals to fill the squareholes in the output tray of the main unit as shownin the illustration.(5) Place the punch unit upside down, then installthe stopper arm at the position shown in the illus-tration. (One supplied screw A)Do not carry the unit while open.

Asus PK-519 Installation Manual

Product

Learn More

Legal