8-60 ASUS PCI-DA2200 User’s ManualDetection of Drive Hot Swap Followed by Auto RebuildFrom the “Drive-side SCSI Parameters” menu, select “Periodic Auto-Detect Failure Drive Swap Check Time – Disabled” and then press[Enter]. Use the arrow keys to select the desired interval for "AutoChecking Drive Hot Swap," and then press [Enter] to confirm. If amember drive of a logical drive fails, the controller will start to checkthe failed drive to check if it has been replaced (i.e., the controllerchecks the same drive channel and ID at the assigned interval.) Oncethe drive has been replaced with another drive, the controller willautomatically start to rebuild to that replacement drive.
