762 ASUS PCI-DA2100/PCI-DA2200 User’s Manual7.1.3. Configure SCSIConfigure RAIDConfiguration Color/MonochromeConfigure BIOSConfigure CardConfigure SCSIReset to DefaultsSCSI Channel 1SCSI Channel 0If this option is selected, a list of physical SCSI channels will appear.Select a SCSI channel that you want to configure, then a new dialogbox of SCSI Channel Configuration will appear.SCSI Channel 0 Configuration :SCSI ID 7Enable SCSI Termination YesConfiguration SCSI Devices Enable Wide SCSI YesSCSI IDUse this option to change SCSI ID of SCSI Channel.Enable SCSI TerminationUse this option to enable/disable SCSI termination.Configure SCSI DevicesUse this option to change the low-level SCSI features of SCSI devices.Device SCSI ID #0 #1 #2 #3 #4 #5 #6 #7Sync Transfer Period (4ns) 12 12 12 12 12 12 12 12Enable SCSI Disconnect Yes Yes Yes Yes Yes Yes Yes YesEnable SCSI Parity Yes Yes Yes Yes Yes Yes Yes YesEnable Wide SCSI Yes Yes Yes Yes Yes Yes Yes YesDevice SCSI ID #8 #9 #10 #11 #12 #13 #14 #15Sync Transfer Period (4ns) 12 12 12 12 12 12 12 12Enable SCSI Disconnect Yes Yes Yes Yes Yes Yes Yes YesEnable SCSI Parity Yes Yes Yes Yes Yes Yes Yes YesEnable Wide SCSI Yes Yes Yes Yes Yes Yes Yes Yes
