Appendix A175ASUS PCI-DA2100/PCI-DA2200 User’s Manualc) In the Main Menu, choose "View and Edit ConfigurationParameters", then "Caching Parameters".d) A sub-menu contains "Write Back CacheEnabled/Disabled" which refers to the Write Back modeis Enabled or Disabled. Press on it and choose"Yes" to change it.e) After the cache mode has been changed, resetting thecomputer is required for the new setting to take effect.After the driver partitioning and operating system areinstalled, use the same procedure to enable theWrite-Back cache – the high performance Write-BackCaching will bring your system into a higherperformance level.2. Follow the original procedure to create the SlackWare Boot Diskand Root Disk from the SlackWare CD-ROM.3. If using ASUS PCI-DA2100/-DA2200 BIOS v1.17B, do not leaveSlackWare CD disc in the CD-ROM drive during system reboot.The BIOS 1.17B has CD-ROM boot ability, it detects the CD in theCD-ROM drive, once it detects the CD disc is bootable, thesystem will boot from CD-ROM not from floppy.4. Use "ASUS PCI-DA2100/-DA2200 Linux SlackWare 3.5 BootDisk" disk 1 instead of the original boot disk, power on thesystem, let the system boot from the boot disk floppy.5. Insert the SlackWare 3.5 CD disc into the CD-ROM drive afterthe system boot up, follow the on-screen instruction to start theinstallation of Linux.6. Insert the Root Disk made from Linux SlackWare CD-ROM intofloppy drive when prompted.7. Follow the on-screen instructions to complete the installation ofSlackWare 3.5.
