43Using the Notebook PC 4Optical DriveInserting an optical disc1. While the Notebook PC’s power is ON, pressthe drive’s eject button and the tray will ejectout partially.2. Gently pull on the drive’s front panel and slide thetray completely out. Be careful not to touch theCD drive lens and other mechanisms. Make surethere are no obstructions that may get jammed un-der the drive’s tray.3. Hold the disc by the edge and face the disc’sprinted side up. Push down on both sides ofthe disc’s center until the disc snaps onto thehub. The hub should be higher than the discwhen correctly mounted.4. Slowly push the drive’s tray back in. The drive willbegin reading the table of contents (TOC) on thedisc. When the drive stops, the disc is ready to beused.NOTE: It is normal to hear as well as feel the CD spinning with great intensity in theCD drive while data is read.
