Asus 1U Rackmount Barebone Server RS120-E3 (PA4) User Manual

Contents

6 - 3 26 - 3 26 - 3 26 - 3 26 - 3 2 C h a p t e r 6 : R A I D c o n f i g u r a t i o nC h a p t e r 6 : R A I D c o n f i g u r a t i o nC h a p t e r 6 : R A I D c o n f i g u r a t i o nC h a p t e r 6 : R A I D c o n f i g u r a t i o nC h a p t e r 6 : R A I D c o n f i g u r a t i o n6.3.16.3.16.3.16.3.16.3.1 Creating a RAID 0 set (Stripe)Creating a RAID 0 set (Stripe)Creating a RAID 0 set (Stripe)Creating a RAID 0 set (Stripe)Creating a RAID 0 set (Stripe)To create a RAID 0 set:1. From the utility main menu, select 1 . C r e a t e R A I D V o l u m e1 . C r e a t e R A I D V o l u m e1 . C r e a t e R A I D V o l u m e1 . C r e a t e R A I D V o l u m e1 . C r e a t e R A I D V o l u m e, thenpress . This screen appears.2. Enter a name for the RAID 0 set, then press .3. Highlight R A I D L e v e lR A I D L e v e lR A I D L e v e lR A I D L e v e lR A I D L e v e l, press the up/down arrow key to select|R A I D 0 ( S t r i p e )R A I D 0 ( S t r i p e )R A I D 0 ( S t r i p e )R A I D 0 ( S t r i p e )R A I D 0 ( S t r i p e ), then press .4. Highlight the D i s k sD i s k sD i s k sD i s k sD i s k s item, then press to select the hard diskdrives you want to include in the RAID set. The S E L E C T D I S K SS E L E C T D I S K SS E L E C T D I S K SS E L E C T D I S K SS E L E C T D I S K S screenappears.5. Use the up/down arrow key to highlight a drive, then press toselect. A small triangle marks the selected drive. Press aftercompleting your selection.Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.[ CREATE ARRAY MENU ][ DISK/VOLUME INFORMATION ]Enter a string between 1 and 16 characters in length that can be usedto uniquely identify the RAID volume. This name is case sensitive andcannot contain special characters.Name:RAID Level:Disks:Strip Size:Capacity:Volume0RAID0(Stripe)Select Disks128KB0.0 GBCreate Volume[ SELECT DISKS ][↑↑↑↑↑↓↓↓↓↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection CompletePort Drive Model Serial # Size Status0 XXXXXX XXXXXX XX.XGB Non-RAID Disk1 XXXXXX XXXXXX XX.XGB Non-RAID Disk2 XXXXXX XXXXXX XX.XGB Non-RAID Disk3 XXXXXX XXXXXX XX.XGB Non-RAID DiskSelect 2 to 4 disks to use in creating the volume.[↑↑↑↑↑↓↓↓↓↓]-Select [ESC]-Exit [ENTER]-Select Menu