Afag LM 20 Instructions Manual

Also see for LM 20: Assembly and operating instructions

Contents

Afag LM 20 Instructions Manual Manual pdf 34 page image

34 LM 20- LM 25-OI-vers. 3.1 gb. 201903144.0.0 Maintenance Instructions4.1.0 Maintenance and servicing of the LM 20/25 linear module compactCAUTIONThe module may only be disassembled when the system isaerated and deactivated. If pneumatic connections aredisconnected when they are under pressure, this may result inserious personal injury due to fast movements of moving parts.MaintenanceintervalService measuresAs required  Clean the module with a dry, lint-free cloth.The module must not be washed down; do not use anyaggressive cleaners.1 Montly  Check the safety labels for damage, readability andcleanliness.Further maintenanceUnder the following conditions is the LM-linear module maintenance free: Clean workshop atmosphere No splash water No dust and fumes caused by abraison or processes Ambient conditions according the technical catalogeThe shock absorbers and stop screws must undergo regular functionality checks, and be replacedif required. We recommend replacing the shock absorber after a maximum of 5 million load cycles.If shock absorbers are missing, defective or incorrectly set up, the functionality of the module will becompromised and may lead to its destruction!