Afag LM 20 Instructions Manual

Also see for LM 20: Assembly and operating instructions

Contents

Afag LM 20 Instructions Manual Manual pdf 18 page image

18 LM 20- LM 25-OI-vers. 3.1 gb. 201903143.1.5 Warranty3.1.6 Areas of applicationThe Linear modules are exclusively for the linear movement in any position ofpayloads at the forehead to record maximum 2-8 kg (LM 20) and 4-9 kg (LM 25)designed, (see technical data). They can also be used in combination with othermodules than Pick and Place machines, the permissible load capacities should,however, not be exceeded.Any other use is regarded as inadequate.NOTEThe manufacturer does not accept any liability for damage resultingfrom such use. The risk is that of the user alone.Intended use also includes paying attention to the Montage Instructions andobserving the maintenance and repair instructions specified by manufacturer.The Linear module LM 20/25 may only be operated and serviced by correspondinglytrained personnel who have also profound knowledge of the dangers.CAUTIONThe applicable regulations for prevention of accidents and theother generally accepted safety-relevant and occupationalsafety and health regulations are to be followed.The term of the warranty on Afag handling components and systems is: 24 months following commissioning, but a maximum of 27 months following delivery. Wear parts (e.g. shock absorbers) are not covered by the warranty. *The warranty covers the replacement or repair of defective Afag parts. No further claims will beaccepted.The warranty will be voided in event of the following: Use for other than the intended purpose Failure to observe the notes on installation, commissioning, operation and maintenance inthe operating manual Improper installation, commissioning, operation and maintenance Independent repairs and constructional changes without prior instruction by AfagAutomation AG Removal of the serial number on the product Using the module without shock absorbers, or with defective shock absorbers Inadequate monitoring of wear parts*A customer has the right to a defect-free product. This is also applicable for accessories and wear parts, if they aredefective.However, wear does not fall within the scope of the warranty.