Advantek Networks (USB 2.0) User Manual

Contents

Advantek Networks (USB 2.0) User Manual Manual pdf 55 page image

8. Upgrading Print ServerOverviewUpgrading print server will allow you to upgrade its firmware inside the print server while thenewer software version of the print server is available from your local dealer. Depending on thedifferent systems users might use, this chapter is divided into several Sections; please refer to thefollowing lists for your systems.1. Upgrading the print server from PSAdmin2. Upgrading the print server from Windows NT/2000/XP/20033. Upgrading the print server from UNIX system4. Upgrading the print server from WEB browserNote: 1.Before you proceed to upgrade the print server, please ensure that the necessary binaryfile is located on your current working directory.2.Before upgrading the print server, ensure that it is not printing jobs. You have to waituntil the print job is finished before you can proceed.3.Be careful not to interrupt the file transfer. If the transfer is interrupted, the print servermay have to be re-initialized by your dealer.Upgrading the print server from PSAdmin1. Log into your NetWare file server as a Supervisor (Admin.) or equivalent.2. Ensure binary file is located in the PSAdmin directory.3. Run PSAdmin from your Windows PC.4. Click the Upgrade icon on tool bar.Upgrading the print server from Windows NT/2000/XP/2003 (ThroughTCP/IP)1. Ensure binary file is located in your current working directory.2. At NT/2000/XP/2003’s DOS prompt, and type “tftp –i server’s IP address> putmpsXX.bin “.3. Wait for the transfer successful message.4. Done.Upgrading the print server from UNIX (Through TCP/IP)1. Log in as root

/ 69

Related manuals for Advantek Networks (USB 2.0)

Advantek Networks APS-U3100 User Manual

This manual is suitable for:

(USB 2.0)APS-U2001

Advantek Networks (USB 2.0) User Manual

Product

Learn More

Legal