Chapter 3 Using the Panel PC 273.5 PS/2 Mouse and KeyboardIf you wish to use a full-size desktop keyboard and PS/2 mouse withyour panel PC, follow these instructions:1. Be sure the panel PC is turned off.2. Connect the Y-shaped adapter to the PS/2 mouse and keyboardport on the rear bottom side of the rear cover. (See Fig. 3-4 andFig. 2-6.)3. Attach the keyboard to the 5-pin port of the Y-shaped adapter.4. Attach the PS/2 mouse to the 6-pin female PS/2 port of theY-shaped adapter.5. Turn on the panel PC.3.6 PCI/ISA Bus ExpansionThe panel PC supports PCI and ISA bus expansion cards. To integratea new PCI or ISA bus card into your system, follow these instructions:1. Turn off the panel PC.2. Unscrew the two screws on the top of the PCI/ISA bus expansionslot cover, and remove this cover.3. Remove the metal plate by unscrewing the single attaching screw.4. Insert the PCI or ISA bus card into the PCI/ISA slot of the risercard. (See Fig. 3-6 overleaf.)5. Run the setup program within your operating system to configureyour system.
