100PPC-123 User's Manual9.13 Save and Exit SetupFigure 9-10: Save and exit setup screenAfter you have made changes in the BIOS setup, press "Esc" to returnto the main menu. Move the cursor to "Save and Exit Setup", or press"F10" and then press "Y", to change the CMOS Setup. If you did notchange anything, press "Esc" again or move the cursor to "ExitWithout Saving" and press "Y" to retain the setup settings. Thefollowing message will appear at the center of the screen to allow youto save data to CMOS and exit the setup utility:SAVE to CMOS and EXIT (Y/N)?9.14 Exit Without SavingIf you select this feature, the following message will appear at thecenter of the screen to allow you to exit the setup utility withoutsaving CMOS modifications:Quit Without Saving (Y/N) ?
