6 0PPC-123 User's Manual6.1 IntroductionThe PPC-123 is equipped with a high performance 32-bit Ethernetchipset which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD standards. It is supported by major network operating systems. Itis also both 100Base-T and 10Base-T compatible. The medium typecan be configured via the RSET8139.exe program included on theutility disk.The Ethernet port provides a standard RJ-45 jack. The network bootfeature can be utilized by incorporating the boot ROM image files forthe appropriate network operating system. The boot ROM BIOS filesare combined with system BIOS, which can be enabled/disabled in theBIOS setup.6.2 Installation of Ethernet DriverBefore installing the Ethernet driver, note the procedures below. Youmust know which operating system you are using in your PPC-123,and then refer to the corresponding installation flow chart. Then justfollow the steps described in the flow chart. You will quickly andsuccessfully complete the installation, even if you are not familiarwith instructions for Windows.Important: The following windows illustrations are examplesonly. You must follow the flow chart instructions andpay attention to the instructions which then appearon your screen.Note 1: The CD-ROM drive is designated as "D" throughoutthis chapter.Note 2: means pressing the "Enter" key on thekeyboard.
