100PPC-123 User's ManualThe options are: 378/IRQ7 (Default), 3BC/IRQ7, 278/IRQ5, Disabled.Parallel Port ModeYou can choose different data transfer modes for your system.The options are: ECP & EPP (Default), SPP, EPP, ECP.ECP Mode Use DMAYou can choose different DMA modes for data transfer.The options are: 3 (Default), 1.9.11Password SettingTo enable the password setting, select the item from the StandardCMOS Setup. You will be prompted to create your own password.Type your password up to eight characters and press "Enter". You willbe asked to confirm the password. Type the password again and press"Enter". You may also press "Esc" to abort the selection and not entera password. To disable the password, press "Enter" when you areprompted to enter the password. A message will appear, confirming thepassword is disabled.Under the BIOS Features setup, if "System" is selected under theSecurity Option field and the Supervisor Password is enabled, you willbeprompted for the supervisor password every time you try to enter theCMOS Setup utility. If "System" is selected and User Password isenabled, you will be requested to enter the user password every timeyou reboot the system. If "Setup" is selected under the SecurityOption field and User Password is enabled, you will be prompted onlywhen you reboot the system.
