Chapter 9 Award BIOS Setup 1179.13 Save and Exit SetupFigure 9-10: Save and exit setup screenAfter you have made changes in the BIOS setup, press "Esc" to return tothe main menu. Move the cursor to "Save and Exit Setup", or press "F10"and then press "Y", to change the CMOS Setup. If you did not changeanything, press "Esc" again or move the cursor to "Exit Without Saving"and press "Y" to retain the setup settings. The following message willappear at the center of the screen to allow you to save data to CMOS andexit the setup utility:SAVE to CMOS and EXIT (Y/N)?9.14 Exit Without SavingIf you select this feature, the following message will appear at the centerof the screen to allow you to exit the setup utility without saving CMOSmodifications:Quit Without Saving (Y/N) ?
