Chapter 2– 14 –PCI-1710 series User’s Manual Advantech Co., Ltd.www.advantech.comAfter the PCI-1710/1710L/1710HG/1710HGL/1711/1711L/1716/1716Lcard is installed, you can verify whether it is properly installed on yoursystem in the Device Manager:1. Access the Device Manager through Control Panel/System/DeviceManager.2. The device name of the PCI-1710/1710L/1710HG/1710HGL/1711/1711L/1716/1716L should be listed on the Device Manager tab onthe System Property Page.Figure 2-3: The device name listed on the Device ManagerNote:. If your card is properly installed, you should see the device name ofyour card listed on the Device Manager tab. If you do see your devicename listed on it but marked with an exclamation sign “!”, it meansyour card has not been correctly installed. In this case, remove thecard device from the Device Manager by selecting its device name andpress the Remove button. Then go through the driver installationprocess again.After your card is properly installed on your system, you can nowconfigure your device using the Device Installation Program that hasitself already been installed on your system during driver setup. Acomplete device installation procedure should include device setup,configuration and testing. The following sections will guide youthrough the Setup, Configuration and Testing of your device.
