|
31 AKMB-G41M User ManualChapter 3 BIOS Operation Resume on PCIE WAKE#Disable/Enable PCIE wake event. Resume On RTC AlarmDisable/Enable RTC wake event. High Performance Event TimerDisable/Enable High Performance event. Restore on AC power LossUse this to set up the system response after a power failure. The "Off" settingkeeps the system powered off after power failure, the "On" setting boots up thesystem after failure, and the "Last State" returns the system to the status justbefore power failure.3.2.10 Advanced PCI/PnP SettingSelect the PCI/PnP tab from the AKMB-G41M setup screen to enter the Plug andPlay BIOS Setup screen. You can display a Plug and Play BIOS Setup option byhighlighting it using the keys. All Plug and Play BIOS Setup options aredescribed in this section. The Plug and Play BIOS Setup screen is shown below. Clear NVRAMSet this value to force the BIOS to clear the Non-Volatile Random Access Mem-ory (NVRAM).The Optimal and Fail-Safe default setting is No. Plug & Play O/SWhen set to No, BIOS configures all the devices in the system. When set to Yesand if you install a Plug and Play operating system, the OS configures all Plugand Play devices not required for bootup. PCI Latency TimerValue in units of PCI clocks for PCI device latency timer register. PCI IDE BusMasterIncrease the HDD write/read speed when enable.
|
