3 AIMB-782 User ManualChapter 1 Hardware Configuration1.3 Specifications1.3.1 System SATA hard disk drive interface: Six on-board SATA III/II connectors supportAdvanced Host controller interface (AHCI) technology and have data transmis-sion rates up to 600 MB/s or 300 MB/s. System Chipset: Q771.3.2 Memory RAM: Up to 32 GB in four 240-pin DIMM sockets. Supports dual-channel DDR31333/1600 SDRAM.– AIMB-782QG2: supports non-ECC unbuffered DIMMs and do not supportany memory configuration that mixes non-ECC with ECC unbuffered DIMMs1.3.3 Input/Output PCIe slot: 1 PCIe x16 expansion slot, 1 PCIe x4 expansion slot, and 1 PCIe x1expansion slot PCI Bus: 4 PCI slots, 32-bit, 33 MHz PCI 2.2 compliant Enhanced parallel port: Configured to LPT1 or disabled. Standard DB-25female connector cable is a optional accessory. LPT1 supports EPP/SPP/ECP. Serial port: Six serial ports, one is RS-232/422/485 with hardware auto-flowcontrol and three are RS-232. Two DB-9 connectors located in rear panel areRS-232 Keyboard and PS/2 mouse connector: Two 6-pin mini-DIN connectors arelocated on the mounting bracket for easy connection to PS/2 keyboard andmouse. USB port: Supports up to 14 USB 2.0 ports for QG2 with transmission rates upto 5 Gbps LPC: One LPC connector to support Advantech LPC modules, such as TPMmodule. GPIO: AIMB-782 supports 8-bit GPIO from super I/O for general purpose con-trol application.1.3.4 Graphics Both dual and quad core processors are integrated Intel HD Graphics 2000/2500/3000/4000. Display memory: 1 GB maximum shared memory with 2 GB and above systemmemory installed DVI-D: Up to resolution 1920 x 1200 @ 60 Hz refresh rate VGA: Up to 2048 x 1536 resolution @ 75 Hz refresh rate1.3.5 Ethernet LAN Supports single/dual 10/100/1000Base-T Ethernet port (s) via PCIe x1 buswhich provides a 500 MB/s data transmission rate. Interface: 10/100/1000Base-TNote! A 32-bit OS may not fully detect 4 GB of RAM when 4 GB is installed.
