Adcom GTP-870HD User Manual

Also see for GTP-870HD: Quick start guide Brochure

Contents

Adcom GTP-870HD User Manual Manual pdf 22 page image

22Chapter 2 - ConnectionsGTP-870HD Owner’s ManualTV/Monitor ConnectionsThere are four ways to connect the GTP-870HD to aTV, monitor, or other display device:• Composite Video• S-Video• Component/Progressive Scan Video• HDMIComposite Video Connections1 Using a video cable, connect the Monitor outputon the GTP-870HD to the video input on yourdisplay device.S-Video Connections1 For higher quality video, use an S-video cable toconnect the Monitor output on the GTP-870HD tothe S-video input on your display device.Component Video Connections1 Using a Component video cable, connect the Y/Pb/Pr outputs on the GTP-870HD to the corre-sponding Y/Pb/Pr inputs on your digital displaydevice.2 Be sure to match the red, green, and blue con-nectors accordingly.HDMI Connections1 Using an HDMI cable, connect the HDMI outputon the GTP-870HD to the corresponding HDMI in-put on your digital display device.2 The built-in HDMI switcher/scaler allows you toview both HDMI source components and upcon-verted legacy sources (composite, S-video, andComponent video) on your digital display de-vice.�� • The OSD is always availableon the Composite and S-videooutputs.• The OSD is always available onthe Component video out-puts, EXCEPT when the inputsignal is higher than standard(NTSC/PAL) resolution. If so,the GTP-870HD switches fromstandard to bypass mode andthe OSD will not appear. How-ever, you can still access theSetup menus by pressing theSetup button (which causes theGTP-870HD to switch back tostandard mode).ComponentVideo OutVideo/S-Video OutHDMIOutVIDEO 1 DOLBY DCOAXIAL 1 -40.0 dBOn-Screen Display (OSD) Notes: