2-9Microsoft Windows NT InstallationFollow the instructions below to enable Hot-Plug PCI support in thedriver:1 Insert the Ultra160 Family Manager Set disk for Windows intodrive A.2 Select Run from the Start menu.3 Type a:\nt4\hotp160m.reg and press Enter.4 Click OK.5 Reboot the system.Note: The filehotp160m.reg adds Hot-Plug related entriesinto the NT Registry, including the driver-specific registryvalue /HOTPLUG. Runninghotp160m.reg will overwriteyour current driver-specific registry values located at:\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\adpu160m\Parameters\Device\DriverParametersIf you have previously added other driver specific registryvalues, you should note them before running thehotp160m.reg file. After runninghotp160m.reg, you mayverify and restore those previously added driver-specificregistry values, if needed.
