Adaptec P2280A Manual

Also see for 39160: Installation guide Manual

Contents

Adaptec P2280A Manual Manual pdf 20 page image

2-8Ultra160 Family Manager Set User’s Guide4 Click on the adpu160m key.5 Select Add Key from the Edit menu; Type Parameters in theKey Name edit box. Leave the Class edit box blank.6 Click on the Parameters key.7 Select Add Key from the Edit menu; Type Device in the KeyName edit box. Leave the Class edit box blank.To specify a certain host adapter, append Device with thenumber of the host adapter. For example, type Device0 for thefirst host adapter, Device1 for the second, etc. If you omit thehost adapter number, the configuration information applies toall Ultra160 Family host adapters.8 Click on the Device key.9 Select Add Value from the Edit menu; type Driver Parametersin the Key Name edit box. Enter REG_SZ as the data type andpress Enter.10 A String Editor text box appears. Enter valid parameters in thetext box. When entering multiple parameters, each parametermust be separated by a space.Note: Changes made with the Registry Editor do not takeeffect until you shut down and then restart your system.Hot-Plug PCI is supported by the Windows NT 4.0 driveradpu160m.sys. You will need a system that supports Hot-Plug PCIas well as associated Hot-Plug PCI application software in order forHot-Plug PCI to work. Do not enable the Hot-Plug PCI feature unlessyour system is Hot-Plug PCI capable and you wish to use the Hot-Plug PCI feature.