Adaptec 58300 - SAS Storage Controller 300 MBps Installation And User Manual

Also see for 48300: Installation and user guide Datasheet

Contents

Adaptec 58300 - SAS Storage Controller 300 MBps Installation And User Manual Manual pdf 85 page image

FSafety InformationTo ensure your personal safety and the safety of your equipment:● Keep your work area and the computer clean and clear of debris.● Before opening the system cabinet, unplug the power cord.Electrostatic Discharge (ESD)Caution: ESD can damage electronic components when they are improperly handled, andcan result in total or intermittent failures. Always follow ESD-prevention procedures whenremoving and replacing components.To prevent ESD damage:● Use an ESD wrist or ankle strap and ensure that it makes skin contact. Connect theequipment end of the strap to an unpainted metal surface on the chassis.● If a wrist strap is not available, ground yourself by touching the metal chassis beforehandling the controller or any other part of the computer.● Avoid touching the controller against your clothing. The wrist strap protects componentsfrom ESD on the body only.● Handle the controller by its bracket or edges only. Avoid touching the printed circuit boardor the connectors.● Put the controller down only on an antistatic surface such as the bag supplied in your kit.● If you are returning the controller to Adaptec, put it back in its antistatic bag immediately.!