36 | | 37VEHICLE CONTROLSVEHICLE CONTROLSTABLE OFCONTENTSINDEXVISUAL INDEXVOICE COMMANDINDEXSAFETYINFORMATIONCLIENTINFORMATIONINSTRUMENTPANELSPECIFICATIONSVEHICLECONTROLSMAINTENANCEAUDIO ANDCONNECTIVITYHANDLING THEUNEXPECTEDBLUETOOTH®HANDSFREELINK®DRIVINGACURALINK®NAVIGATIONWiper OperationThe windshield wipers and washers can be used when the vehicle is on. Move thewiper lever up or down to the desired position.Interior LightsChange the interior light settings using the switches on the ceiling.Front lightsOn position: Interior lights remain on.Door-activated position: Interior lights come onwhen any of the doors are opened, the driver’s dooris unlocked, or the vehicle is turned off.Off position: Interior lights remain off.Press the map light button to turn lights on or off.Cargo lightsLocated on the inside of the tailgate door.On position: The light comes on when the tailgateis open and goes off when it is closed.Off position: The light stays off.Door-activated positiononoffonoffOne-Touch Turn SignalUse this quick and convenient method to signal a lane change.Lightly push the turn signal lever up or down for athree-blink sequence.For a continuous signal, push the lever up or downuntil it locks into place.rightLeft*if equippedHeadlight-Wiper IntegrationWhen the headlights are in the AUTo position, they automatically turn on whenthe front wipers operate several times within a certain interval. The headlightsturn off shortly after the wipers are turned off, or if there is enough ambient light.MistPull towardyou forwasher.OFFINT (intermittent)*/AUTO (automatic)*LO: low speedHI: high speedIntermittent Wipers*When you move the lever to the INT position, the wipers operate based on thedelay adjustment.rotate the adjustment ring to adjust the wiper delay.Long delay rotate theadjustmentring.Short delayINT position