247uuWhen DrivinguBSI (Blind Spot Information)*DrivingPress the BSI OFF button until you hear a beep to turn on and off the system. Amessage on the multi-information display appears for five seconds and indicatesthat the system is on or off.When BSI is off, the BSI indicator in the instrument panel stays on.BSI stays off next time you start the engine, if you turned it off the last time you drivethe vehicle.■ BSI On and Off 1BSI (Blind Spot Information)*The BSI alert indicator may not come on underfollowing conditions:• A vehicle does not stay in the alert zone for morethan two seconds.• A vehicle is parked in a side lane.• The speed difference between your vehicle and thevehicle you are passing is greater than 6 mph (10 km/h).• An object not detected by the radar sensorsapproaches or passes your vehicle.Turn the system off when towing a trailer. The systemdoes not work properly for the following reasons:• The added mass tilts the vehicle and changes the radar coverage.• The trailer itself can be detected by the radar sensors,causing the BSI alert indicators to come on.BSI may be adversely affected when:• Objects (guard rails, poles, trees, etc,.) are detected.• An object that does not reflect radio waves well,such as a motorcycle, is in the alert zone.• Driving on a curved road.• A vehicle is moving from a far lane to the adjacent lane.• The system picks up external electrical interference.• The rear bumper or the sensors have been improperlyrepaired or the rear bumper has been deformed.• The orientation of the sensors has been changed.• In bad weather (Heavy rain, snow, and fog).For a proper BSI use:• Always keep the rear bumper corner area clean.• Do not cover the rear bumper corner area withlabels or stickers of any kind.• Take your vehicle to a dealer if you need the rear bumpercorner area or the radar sensors to be repaired, or therear bumper corner area is strongly impacted.BSIIndicatorBSI OFF ButtonMulti-informationdisplay* Not available on all models
