131uuOperating the Switches Around the Steering WheeluTurn SignalsContinuedControlsTurn SignalsThe turn signals can be used when the ignitionswitch is in ON w*1.Light SwitchesRotating the light switch turns the lights onand off, regardless of the position of theignition switch.■ High beamsPush the lever forward until you hear a click.■ Low beamsWhen in high beams, pull the lever back toreturn to low beams.■ Flashing the high beamsPull the lever back, and release it.*1: Models with the keyless access system have an ENGINE START/STOP buttoninstead of an ignition switch.Right TurnLeft Turn■ Manual Operation 1Light SwitchesIf you remove the key *1 from the ignition switch whilethe lights are on, a chime sounds when the driver’sdoor is opened.When the lights are on, the lights on indicator in theinstrument panel will be on.2 Lights On Indicator P. 75Repeatedly turning the headlights on and off reducesthe life of the HID headlight bulbs.If you sense that the level of the headlights isabnormal, have the vehicle inspected by a dealer.Do not leave the lights on when the engine is offbecause it will cause the battery to discharge.High BeamsFlashing the high beamsLow BeamsTurns on parking, side marker,tail, and rear license plate lightsTurns on headlights, parking,side marker, tail, and rearlicense plate lights
