ActionTec GT724-WG User Manual

Also see for GT724WG: Specification User guide Quick start guide Specifications Specfications

ActionTec GT724-WG User Manual Manual pdf 17 page image

17Domain Name“Domain Name” allows a network administrator to enter a domain name if the network is being used in adomain environment.DNS (Dynamic or Static)These options designate the type of DNS server provided by the ISP. If the ISP provided DNS serverinformation, select the type here. If not, leave as is.DNS Server 1“DNS Server 1” is the primary DNS server provided by the ISP. If the ISP provided DNS serverinformation, enter it here. If not, leave the text box intact.DNS Server 2“DNS Server 2” is the secondary DNS provided by the ISP. If the ISP provided secondary DNS serverinformation, enter it here. If not, leave the text box intact.Services BlockingSelecting Services Blocking in the “Advanced Configuration” screen generates the “Services Blocking”screen.45 Chapter 4 Using Advanced SetupTo modify Internet privileges (Web, FTP, Newsgroups, etc.) for the computers on the network:1. Enter the computer’s IP address in the IP Address: text box.2. Select the Internet service(s) to be blocked.3. Click Add to enter the computer’s IP address in the “Blocked IP Address List” text box.4. To remove blocked services, select the computer’s IP address in the “Blocked IP Address List” text boxand click Remove.Website BlockingSelecting Website Blocking in the “Configuring the Advanced Settings” screen generates the “WebsiteBlocking” screen. This feature enables the Gateway to block Web sites to all computers on the network. Toblock a Web site, enter the address of the Web site in the “Website” text box and click Add. The blockedWeb site address is displayed in the “Blocked Website List” text box, and will not be available tocomputers on the network. To remove a blocked Web site, click on it in the “Blocked Website List,” thenclick Remove. Website Blocking supports blocking up to 50 Web sites.46 Actiontec 54 Mbps Wireless DSL Gateway User ManualRemote ManagementSelecting Remote Management in the “Configuring the Advanced Settings” screen generates the “RemoteManagement” screen. Remote Management allows access to the Gateway through the Internet via anothercomputer. Actiontec recommends leaving the Remote Management Off (the factory default setting).To access the Gateway from the Internet, activate Remote Management by selecting On and writing downthe WAN IP address of the Gateway (see “WAN IP Address”). On a computer outside of the network, open aWeb browser and enter the Gateway’s WAN IP address in the address text box. A username and passwordprompt appears in the browser window. Enter the username and password in the appropriate text boxes toaccess the Gateway.