ActionTec GT724-WG User Manual

Also see for GT724WG: Specification User guide Quick start guide Specifications Specfications

ActionTec GT724-WG User Manual Manual pdf 14 page image

144Using Advanced SetupThis section contains information concerning setting up the advanced features of the Gateway, such aswireless settings, remote management, and Web site blocking, using the Gateway’s Web Configurator.Accessing Advanced SetupTo access the Web Configurator’s Advanced Setup screens:1. Open a Web browser. In the “Address” text box type: http://192.168.0.1then press Enter on thekeyboard.2. The “Main Menu” screen appears. Select Setup/Configuration.3. In the “Set Up/Configuration” screen, read the instructions, then select Advanced Setup from the menuon the left side.Actiontec 54 Mbps Wireless DSL Gateway User Manual34. In the next screen, read the recommendations. To perform an advanced setup on the Gateway, clickBegin Advanced Setup.5. The “Configuring the Advanced Settings” screen appears. To check all the settings, or if unsure of whichsettings to modify, select Next. To modify a specific configuration, click on its name in the menu baron the left.? Note: To save changes made in any of the Advanced Setup screens, click Save andRestart at the bottom of the gray menu on the left side of the screen.WAN IP AddressSelecting WAN IP Address in the “Configuring the Advanced Settings” screen generates the “WAN IPAddress” screen. WAN IP Address allows manual set up of the IP address of the Gateway. There are fiveways to do this: Transparent Bridging, Obtain an IP Address through PPPoE, Obtain an IP AddressThrough PPPoA, Obtain an IP Address through DHCP, and Specify a Static IP Address.? Note: If unsure about which connection is present, check with the Internet ServiceProvider (ISP) before continuing.39 Chapter 4 Using Advanced SetupAfter selecting a connection type, click Next to continue configuring the connection.