7.3 Cleaning the air systemThis must be done whenever the AIR-N-GO® easy is used.1. Unscrew the reservoir cover.2. Pour the remaining powder into an infectious medical waste container.3. Run the air without a reservoir cover until there is are no traces of moisture on the inside walls of the reservoir.4. Wipe the inside walls of the reservoir with a dry, lint-free cloth.If water droplets continue to appear on the inside walls of the reservoir, check the condition of the O-ring onyour quick coupling.Page 18/35 - User Manual • AIR-N-GO® easy • J10129 • V5 • 11 • 10/2015 • ND27US050E