FPC 8084 User¶s Manual5. Calibration:To adjust the display with touch panel, click “Calibration” and follow thecalibrate point to do calibration; there are five points on screen forcalibration.6. Press OK.3.2.3 Driver Installation- DOS3.2.3.1 Using “INSTALL.EXE” utility to installPenMount software driver.1. Insert Driver CD and select the “Driver\Touch screen\DOS\Install.exe2. Press ENTER key to install the drivers to drive C or use keyboardto key-in the hard disc drive that you plan to install the driver.3. The driver will ask “Do you want to modify your Autoexec.bat toinitialize PenMount? (Y/N)” Suggest you choose “YES” forgenerating the initialization instructions in AUTOEXEC.BAT files.Then follow up the instructions to complete the installation.3.2.3.2 Identify the communication port and IRQ27
